TOYOTA 5SPD TRANSMISSION REBUILD BEARING KIT W/ Synchros

$249.00

1986-1994 R151 R154

Description

* TOYOTA 5 SPEED *

* R151 * R154 *

MANUAL TRANSMISSION REBUILD KIT
with SYNCHROS!

Vital Parts is offering this NEW manual transmission overhaul rebuild kit
for the various Toyota car and truck applications from 1986 – 1994.
These transmissions can be found in both rear wheel drive or four wheel drive applications

Specifically this transmission has an aluminum case with a rear load.
The input bearing has a 92mm outside diameter (35TM03, DG4092, 040-1, or 40TM05).
The rear mainshaft bearing has a 72mm outside diameter and all of the synchro rings are the same size.

Please see the detailed description below for your specific model.
As always if you are unsure of specific fitment please email us and we would be happy to help!

TOYOTA SUPRA:
6 CYL 3.0L 1986 – 1993 – 5spd, RWD, R154
(aluminum case, rear a load TURBO 1st-2nd and 3dr-4th synchro assemblies use wire type springs)
92mm O.D input bearing. (35TM03 or DG4092)

TOYOTA PIKCKUP:
4 CYL 2.4L 1985 – 1988 – 5spd, RWD, R151
(aluminum case, removable bellhoussing, 1-TON)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

TOYOTA PICKUP:
4 CYL 2.4L 1986 – 1988 – 5spd, RWD, R151
(aluminum case, removable bellhoussing, TUBRO)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

TOYOTA PICKUP:
6 CYL 3.0L 1988 – 1994 – 5spd, RWD, R151
(aluminum case, removable bellhoussing)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

TOYOTA T100:
6 CYL 3.0L 1993 – 1994 – 5spd, RWD or 4WD, R151
(aluminum case, removable bellhoussing)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

TOYOTA 4RUNNER:
4 CYL 2.4L 1986 – 1988 – 5spd, RWD or 4WD, R151
(aluminum case, removable bellhoussing, TUBRO)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

TOYOTA 4RUNNER:
6 CYL 3.0L 1988 – 1994 – 5spd, RWD or 4WD, R151
(aluminum case, removable bellhoussing)
72mm O.D rear mainshaft bearing – 92mm O.D input bearing (040-1, 35TM03, DG4092, 40TM05)
1st-2nd synchro assemby uses typical wire type springs – ALL synchro rings are single piece design

You may also like…